Concierge 4
Whether picking up VIPs at a private airport, or escorting guests on a factory tour, our four- and six-seat Concierge models will impress even the most discerning passengers. With a smooth, quiet ride, and the widest, most comfortable seats in the industry, these vehicles provide a truly first-class experience.
- Features
- Specs
- Options
- Photos
General Information
Drivetrain
Transmission
Mechanical, 2 rear wheel transaxle
Engine
Engine
Yamaha built, low-emission, 1-cylinder, 60° incline, OHV, forced-air cooled
Horsepower
11.4 hp (8.5 kW) @ 3,500 rpm
Carburetion
Electronic fuel injection
Ignition
Transistor magneto ignition
Fuel Capacity
5.8 gal. (22 l)
Lubrication
Splash-style positive oil
Air Filter
2-stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge
Measurements
Length
128 in. (3,250 mm)
Height
Without suntop - 46.9 in. (1,190 mm)
Width
47.2 in. (1,200 mm)
Wheelbase
98.1 in. (2,492 mm)
Ground Clearance
Minimum - 4.4 in. (112 mm)
Operational
Brakes
Self-adjusting, mechanical drum
Suspension
Front - Tru-Trak II™ fully independent automotive-style strut
Rear - Mono-linkage
Tires
Tire Size - 18 x 8.5-8 (4-ply rating)
Front Wheel Tread - 34.3 in. (870 mm)
Rear Wheel Tread - 38.6 in. (980 mm)
Seating
Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp and moisture resistant polypropylene bottom, strengthened with plated steel inserts
Capacity - 4 persons
Turning Radius
13.9 ft. (4.2 m)
Steering
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed bearings and greaseless tie-rod ends.
Speed
Max Forward - 15 mph (24 km/h)
Max Reverse - 5 mph (8.1 km/h)
Other
Additional Colors
Emerald, Sandstone, Moonstone, Onyx, Jasper, Tanzanite
Frame
HybriCore™ chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor; frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and an electrostatic applied polyester / urethane powder topcoat